ONIE Recovery on x86-enabled Netberg Aurora switches

This page describes how to install the ONIE boot loader on Netberg Aurora switches.

1. Download the recovery image suitable for your switch or build one from GitHub.

Intel Tofino-based switches:

Aurora 610 recovery image

Aurora 710 recovery image

Aurora 750 recovery image

Aurora 810 recovery image

Innovium-based switches:

Aurora 615 recovery image

Aurora 715 recovery image

Broadcom-based switches:

Aurora 221 recovery image

Aurora 621 recovery image

Aurora 721 recovery image

Aurora 820 recovery image

Aurora 830 recovery image

Aurora 420/620/630/720 recovery image for OpenSwitch and ICOS

Aurora 420/620/630/720 recovery image for Open Networking Linux

2. Copy ONIE recovery to a USB thumb device.

Use “dd” command to copy the .iso image to a USB stick:

dd if=onie-recovery-x86_64-netberg_rangeley_p1330-r0.iso of=/dev/sdb bs=10M

3. Connect a USB thumb device to the front panel USB port.

4. Connect to the switch via serial console using standard settings:
adobe genp 3414 top

WARNING: Do not use a USB-mini USB cable, it will damage the console port on the switch.

Use the enclosed serial cable.

5. Power on the switch and press <ESC> until entering BIOS.

Go to the “Save & Exit” tab and boot to the USB drive using “Boot override” section.

aurora_bios

6. Embed ONIE to the switch.

embed_onie

7. ONIE is ready after reboot. (Please remove the USB stick)

onie_boot

Adobe Genp 3414 Top |verified| -

Adobe GenP is a widely used third-party tool designed to bypass licensing for Adobe Creative Cloud applications on Windows. Versions such as GenP 3.4.14

: Adobe has a dedicated “Adobe Genuine Software Integrity Service” that periodically checks for invalid licenses. GenP attempts to disable this service, but Adobe continuously updates its detection methods. There is no permanent “safe” patch.

To run successfully, GenP instructions often tell users to disable their system's real-time antivirus protection or add strict exclusion folders. Lowering your system defenses—even temporarily—creates an active window for malware to slip past Windows Defender unnoticed. 3. Unstable Software Performance adobe genp 3414 top

: Using a "Pop-up Wire" or manual firewall rules to prevent Adobe from verifying the license via the internet.

Rather than chasing “GenP 3414 top,” consider these legitimate options: Adobe GenP is a widely used third-party tool

While the actual setup steps vary depending on the build, community repositories like GitHub's free-adobe guides reveal that the general deployment workflow follows a systematic pattern:

However, the subreddit is also rife with misinformation. Posts asking “Which GenP is original?” are common, with users admitting they cannot tell the real version from fake ones. One user summarized the dilemma perfectly: “3‑4 GitHub links exist, one is original but gives a 404 error; the others look suspicious. Normally I’m against cracking, but as a student I cannot pay 500 lira per month just for a few minutes of editing.” There is no permanent “safe” patch

Supports nearly all Adobe CC 2026 applications, including Photoshop, Premiere Pro, Illustrator, After Effects, and more.