I can provide the direct official links or step-by-step driver solutions for your exact setup. Share public link
In this post, we’ll walk through why firmware matters for this specific device and the step-by-step process to perform an upgrade safely. Why Update Your DSO-TC2 Firmware?
:
The DSO-TC2 will usually reboot automatically into its newly updated interface. If it doesn't, disconnect the cable and turn it on manually. Troubleshooting Common Firmware Issues
Manufacturers frequently release firmware updates to refine hardware performance. For the DSO-TC2, updating the firmware brings several immediate benefits:
Refers to the Digital Storage Oscilloscope (DSO) part of the software.
To allow the flashing tool to overwrite the internal memory, you must force the device into bootloader/upgrade mode. Power off the DSO-TC2 completely.
Press and hold the designated upgrade key combination (typically holding the button while inserting the USB cable connected to your PC, or holding a specific directional key).
| SWD Pin | PCB Pad | Signal | |---------|---------|--------| | 1 | Square | SWDIO | | 2 | Round | SWCLK | | 3 | Large | GND | | 4 | (NC) | 3.3V (optional) |
While FNIRSI provides official updates, the real adventure lies in . For other FNIRSI devices like the GC-01, the community created projects like Rad Pro to add features the factory never intended. For the DSO-TC2, the quest is often about finding the right version to fix hardware variations (like different screen drivers) that the official firmware might not support. How to "Write Your Own" Chapter (Updating)
: Reverse engineering for interoperability is permitted in many jurisdictions under fair use; however, redistributing modified firmware may violate FNIRSI’s EULA. Users assume all risks.
Ensure your DSO-TC2 has at least 80% battery, or keep it plugged into a stable USB power source.
: The current firmware parses NEC infrared codes. Adding support for more protocols (like RC5 or Sony) would expand its utility as a remote control diagnostic tool.
