±0.1∘Cplus or minus 0.1 raised to the composed with power C precision.
This guide summarizes the core components of the manual, providing a practical overview of installation, operation, and maintenance. 1. Overview and Technical Specifications
Set the : Input aspiration volume (typically 400 µL or 500 µL) and delay/read times.
are the most direct; you typically mix the sample and reagent in a cuvette. The analyzer aspirates the mixture and takes a photometric reading. For a "Concentration" test, the instrument uses a calibration curve to calculate the result. The manual explains how to input a "Calibration Factor" or use a "Single Calibrator". biosystems bts 350 user manual
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. SEMI-AUTOMATIC ANALYZER BTS-350 - BioSystems S.A.
Flush the flow cell with a recommended cleaning solution or distilled water after each session to avoid protein buildup.
Clogged aspiration needle, kinked silicone tubing, or a worn-out peristaltic pump block. Overview and Technical Specifications Set the : Input
You can find the BioSystems BTS 350 user manual and related technical documentation through the following links:
Flow cuvette, standard cuvettes, or round test tubes (12mm). Memory: Stores up to 150 methods and 2000 patient results.
It is highly likely you are looking for the manual. If "BTS" is a typo, here is the good piece of information you need. For a "Concentration" test, the instrument uses a
To ensure your lab maintains exact precision and compliance with local clinical standards, always cross-reference this operational layout with the specific revision of the official provided directly by your distributor.
Permit a window for the optical system and Peltier blocks to stabilize.
Navigating the BTS-350 software interface is straightforward once you understand the core hierarchical menu options.
Maintain an ambient operating temperature between 15°C and 32°C. Power Connection Connect the device to a grounded electrical outlet.
The official manual provides two main operational procedures: Single Assay and Multi-Assay.