Thyssenkrupp Levant Stair Lift Installation Manual File

The Levant is equipped with multiple safety edges designed to stop the lift instantly if an obstruction is encountered. Test the following manually:

Two wireless infrared or radio-frequency call/send remotes. Required Tools Socket wrench set (metric and standard) Allen/Hex key set Electric drill with wood/concrete drill bits Spirit level (torpedo and 4-foot levels)

Transformer unit and copper charging contact strips. thyssenkrupp levant stair lift installation manual

The unit is parked off its charging station. Drive the lift to the absolute top or bottom of the rail to engage the charge contacts.

A: Yes, thyssenkrupp provides a warranty. However, it is strictly conditional on the lift being installed by an authorized dealer. Attempting a self-installation immediately voids all manufacturer warranties. The Levant is equipped with multiple safety edges

The Levant installation manual provides comprehensive technical details on rail mounting, electrical connections, and site preparation.

If you encounter any mechanical failures or error codes not covered in this guide, consult a certified ThyssenKrupp accessibility technician to avoid voiding your warranty or compromising user safety. The unit is parked off its charging station

Before starting the installation, ensure the staircase meets the following technical specifications:

Fit the copper charging strips into the designated channels at the top and bottom sections of the rail.

The following safety considerations must be taken into account during installation:

: The Levant is designed for straight staircases with a constant gradient between 28° and 53° Space Clearance : The minimum staircase width required is typically to allow for the seat and footrest movement. Electrical Setup : A standard 13-amp power outlet