Confirm your exact sub-model. Trying to write an AE9120 file to an incompatible hardware variant triggers a quick signature block failure to prevent hard-bricking your phone.
Once the tool UI opens, click on the (Load Packet) located at the top-left corner.
Lava (or Benco) V90 PCB/CPU ID: AE9120 Firmware version mentioned: S160 Issue: After flashing, phone sticks at boot logo (hang on logo) User action prior: Attempted to flash full firmware (likely via SP Flash Tool or similar) lava benco v90 ae9120 flash file s160 hang logo new
Flashing firmware carries inherent risks of data loss or device damage if performed incorrectly. Ensure you complete these preparation steps:
Turn on your phone. The first boot may take 5–10 minutes. Troubleshooting "Hang Logo" If the device still hangs on the logo, try the following: Confirm your exact sub-model
Resolves the "Hang on Logo" and auto-restart problems by reinstalling the factory stock ROM.
Click the or the designated firmware selection button within the tool. Lava (or Benco) V90 PCB/CPU ID: AE9120 Firmware
Try a different USB port (preferably USB 2.0) or a different cable.
If your Lava Benco V90 (model AE9120) is stuck on the boot logo, restarting constantly, or suffering from system-wide lag, flashing the official is the most effective solution . This guide provides the necessary details to download the flash file and restore your device to its factory working state. Why Use the S160 Flash File?
The most reliable solution? Flashing the device with a . This article serves as a complete guide to understanding, downloading, and installing the correct Lava Benco V90 AE9120 S160 Hang Logo New Flash File using tools like SP Flash Tool.
Keep the following in mind before you begin: