Using your reference photo, plug the wire harnesses back into their respective ports. Ensure every connection is seated deeply and securely. A loose connection here is the #1 cause of "No Flow" or "Check Cell" errors after installation.
: Use the designated installation package provided through official SAP distribution channels or authorized partners.
: Obtain the official installation files from the authorized software provider or the SAP Support Portal Extract Files ssp0117rpc install
Connect the chassis ground screw to the earth ground of your enclosure to protect against electrical surges. Step 3: Connecting the Serial Device
Set your PC's IP to an address on the same subnet (e.g., 192.168.1.100 if the device is 192.168.1.254 ). Set the Subnet Mask to 255.255.255.0 . Step 3: Access the Web User Interface (Web UI) Open a web browser (Chrome, Edge, or Firefox). Using your reference photo, plug the wire harnesses
Assign an available COM port number (e.g., COM4) and apply the changes.
Manually verify that you are pointing to the correct installation path ( C:\Renesas\e2_studio or similar). : Use the designated installation package provided through
This indicates the file is missing, corrupted, or not properly registered.