35mm DIN Rail or Panel Mount (depending on casing style). 2. Key Interface and Button Functions
Sinotimer devices are built to resist dust and moisture, but they should still be housed in a proper enclosure for longevity in harsh environments. Temperature Controller - Sinotimer
Connect the two matching color wires (usually red) to Terminals 10 and 11 , and the third wire (usually blue or white) to Terminal 9 . Alarm Output (Terminals 3 and 4) sinotimer mc101 manual
While holding , repeatedly press D+ until the correct day of the week flashes or highlights at the top of the LCD screen (e.g., MO, TU, WE).
Terminals 5 and 6 act as a dry-contact switch. Connect your load's live wire in series through these terminals. Temperature Sensor Input (Terminals 9, 10, and 11) 35mm DIN Rail or Panel Mount (depending on casing style)
The back of the relay is labeled . Here is the translation:
Offset value to calibrate sensor reading errors. If the PV reads 2°C too high, set SC to -2.0 . 5. How to Run Auto-Tuning Temperature Controller - Sinotimer Connect the two matching
Ensure your sensor, heater, and controller are completely wired and powered on.
Navigating the interface requires understanding the function of the four primary buttons:
Ensure power is disconnected before wiring to prevent equipment failure or shock.
Press and hold or MODE for 3 seconds to return to the main display. 4. Safety & Best Practices