Some users use third-party "Fix Firmware" to reset toner counters to 100% and allow the use of refilled cartridges without a chip.
for 15 seconds while the machine is unplugged.
If a soft reset does not clear the error light, you can perform a factory reset using the physical buttons on the machine. This restores the device to its original out-of-the-box settings.
using the power button located on the top control panel. how to reset samsung ml-2165 printer
Open your file explorer and navigate to: C:\Windows\System32\spool\PRINTERS
Reconnect the power cable and turn the printer back on. This drains residual power and clears temporary data that might be causing errors. 2. Hard Reset: Factory Settings
Open the top cover, remove the toner cartridge, and check the fuser area (Caution: may be hot). Reseat Components: Some users use third-party "Fix Firmware" to reset
For a permanent bypass of the toner chip (allowing you to use refilled cartridges without a new chip), some users apply a custom firmware "fix." This requires printing a Configuration Report (hold the WPS button for 10 seconds) to find your specific Serial Number and CRUM version before running a software tool on your PC. Troubleshooting Common LED Indicators
the power cord from the wall and wait for approximately 30 seconds . Plug it back in and power the device on. 2. NVRAM/Factory Reset (Button Method)
This permanently disables the printer chip checking mechanism. This restores the device to its original out-of-the-box
Some variants allow entry into a "Tech Menu" by quickly pressing a specific sequence (such as Menu → # → 1934
Keep both buttons pressed down simultaneously for approximately .
Before performing a reset, check the status LED light on the printer's control panel. It helps diagnose whether a reset will fix the problem: The printer is ready and online. Blinking Green: The printer is receiving data or printing.
