Canon G3400 Reset Jun 2026

What or how many light flashes you are seeing Whether you are using a Windows PC or a Mac to fix it If you have already tried entering Service Mode

To reset your , you likely need to clear the 5B00 error , which indicates that the ink absorber (or "diaper") is full. Manual Reset Procedure (Service Mode)

The power light will flash rapidly while the system formats all network configurations, administrative passwords, and cloud settings back to factory defaults. 4. Resetting the Ink Level Detection System

Whether you're facing a stubborn "ink absorber full" error ( ) or just need to clear your network settings, resetting a Canon PIXMA G3400 canon g3400 reset

Troubleshoot or white lines in your prints

Press the button once . The printer should print a page showing the reset information (e.g., "D=000.0"). Press the Power button again to turn the printer off.

The physical waste ink pads are likely saturated with ink. Open the lower casing to wash or replace them. What or how many light flashes you are

the waste ink absorber pads to prevent ink from leaking out of the bottom?

Keep holding the button, but release the Stop/Reset button.

Connect the printer to a Windows PC using a high-quality USB cable (Wi-Fi will not work in Service Mode). Resetting the Ink Level Detection System Whether you're

Ensure the printer is turned off, but remains plugged into the power outlet. hold the Stop button (the red triangle in a circle). While still holding the Stop button, press and hold the Power Continue holding the Power button and release the Stop While still holding the Power button, press the Stop button 5 times

Keep holding the button, then release the Stop/Reset button.

to lock itself once a specific volume of ink is projected to have been used.