Jump to content Ld-c101 Usb To Ci-v Driver
View in the app

A better way to browse. Learn more.
Ld-c101 Usb To Ci-v Driver
Next

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Ld-c101 Usb To Ci-v Driver

When setting up your software, match these settings precisely with your radio's internal menu parameters:

: When you plug the cable in, the driver tells Windows, macOS, or Linux that this USB device should be treated as a standard serial COM port.

It converts the universal serial bus (USB) signaling from your PC or laptop into the single-wire TTL voltage levels required by the Icom CI-V protocol.

If your software cannot connect to the radio, the problem is usually a driver conflict or incorrect software settings. Ld-c101 Usb To Ci-v Driver

Right-click the Windows Start button and select . Expand the Ports (COM & LPT) section.

The LD-C101 USB to CI-V driver is a software component that enables communication between a computer and certain devices, such as amateur radio transceivers, that use the CI-V (Controller Interface V) protocol. This protocol is commonly used in amateur radio equipment to allow for remote control and data transfer.

: When connected, Windows typically identifies the device as "USB-SERIAL CH340K (COMx)" in the Device Manager. Driver Requirements When setting up your software, match these settings

Match this to your radio's internal CI-V baud rate. Standard defaults are often 9600 or 19200 bps. (Check your Icom manual to verify).

: Your logging software automatically records the frequency and mode of every contact.

The single most important step for a successful driver installation is knowing which chip is inside your cable. While many USB-to-serial devices use chips from FTDI, Prolific, or SiLabs, the LD-C101 cable has been confirmed to use a chip from WCH (Nanjing Qinheng Microelectronics), specifically the . The CH341 is a popular and versatile USB-to-serial converter chip, supporting common operating systems. The LD-C101's hardware IDs (VID/PID) have been identified as 1A86 (the vendor ID for WCH), which corresponds to the CH341 family of chips. Right-click the Windows Start button and select

Download the latest Virtual COM Port (VCP) drivers from the official FTDI website. 2. Connect the Cable

The "story" of this device is essentially one of bridging the gap between legacy analog hardware and modern digital control. The Purpose: Bridging Two Worlds

Configure browser push notifications

When setting up your software, match these settings precisely with your radio's internal menu parameters:

: When you plug the cable in, the driver tells Windows, macOS, or Linux that this USB device should be treated as a standard serial COM port.

It converts the universal serial bus (USB) signaling from your PC or laptop into the single-wire TTL voltage levels required by the Icom CI-V protocol.

If your software cannot connect to the radio, the problem is usually a driver conflict or incorrect software settings.

Right-click the Windows Start button and select . Expand the Ports (COM & LPT) section.

The LD-C101 USB to CI-V driver is a software component that enables communication between a computer and certain devices, such as amateur radio transceivers, that use the CI-V (Controller Interface V) protocol. This protocol is commonly used in amateur radio equipment to allow for remote control and data transfer.

: When connected, Windows typically identifies the device as "USB-SERIAL CH340K (COMx)" in the Device Manager. Driver Requirements

Match this to your radio's internal CI-V baud rate. Standard defaults are often 9600 or 19200 bps. (Check your Icom manual to verify).

: Your logging software automatically records the frequency and mode of every contact.

The single most important step for a successful driver installation is knowing which chip is inside your cable. While many USB-to-serial devices use chips from FTDI, Prolific, or SiLabs, the LD-C101 cable has been confirmed to use a chip from WCH (Nanjing Qinheng Microelectronics), specifically the . The CH341 is a popular and versatile USB-to-serial converter chip, supporting common operating systems. The LD-C101's hardware IDs (VID/PID) have been identified as 1A86 (the vendor ID for WCH), which corresponds to the CH341 family of chips.

Download the latest Virtual COM Port (VCP) drivers from the official FTDI website. 2. Connect the Cable

The "story" of this device is essentially one of bridging the gap between legacy analog hardware and modern digital control. The Purpose: Bridging Two Worlds