Staples 17466 Laminator Manual !new! Jun 2026

Plug the power cord into a standard 120V AC electrical outlet. Critical Safety Rules

Switch the toggle button to your desired pouch thickness ( or 5-mil ). The red POWER light will turn on. 2. Pouch Loading Centered your document inside the laminating pouch.

The pouch was inserted open-side first, fed at an angle, or the document inside was too thick.

Do not attempt to laminate thermal paper (like store receipts), crayons, or materials that melt at low temperatures. 3. Step-by-Step Operating Instructions staples 17466 laminator manual

Essential for heat-sensitive items like photos, old receipts, or certain inks that might be damaged by high temperatures. Other Notable Features Jam Release Lever:

Before starting, ensure the laminator is on a stable surface with at least behind it to allow documents to exit freely.

Staples 17466 Laminator Manual: The Ultimate Guide to Operation, Troubleshooting, and Maintenance Plug the power cord into a standard 120V

Run a cleaning sheet (or a folded piece of cardstock) through the laminator every 5–10 uses to remove residual adhesive.

Once the pouch exits the rear, place it on a flat surface to cool for one minute. ⚠️ Critical Safety Tips

, it features a 9-inch throat width and supports both 3 mil and 5 mil laminating pouches. Staples.com Core Operating Procedures Do not attempt to laminate thermal paper (like

Keep the pouch straight to prevent crooked feeding and wrinkling. 5. Cooling down

Fortunately, you don’t need the original booklet to master this machine. This comprehensive article serves as your complete user manual, covering everything from initial setup and step-by-step operation to common troubleshooting and maintenance. By following this guide, you can achieve professional-grade results every time.

Yes, but you must leave at least 1/8 to 1/4 inch of space between each cutout. Do not cut the pouch into small pieces before laminating, as individual pieces will jam the machine. Always laminate the full pouch first, then cut out your pieces afterward.

9.5 inches (Supports up to standard Letter size documents) Pouch Compatibility: 3 mil and 5 mil thickness Lamination Type: Dual mode (Hot and Cold lamination) Warm-Up Time: Approximately 4 to 5 minutes ⚡ Getting Started