Erickhill Rt-100 User Manual Jun 2026

| Code | Meaning | Solution | |------|---------|----------| | E1 | Internal sensor fault | Replace thermostat | | E2 | External sensor shorted | Check wiring of S1/S2 | | E3 | External sensor open circuit | Sensor not connected or broken | | AL | High-temperature alarm | Check load current >16A |

Short-press the Power button while the device is on to display the highest detected radiation spike during your current test session.

3.7V lithium battery (rechargeable via USB-C or Micro-USB, depending on production batch) 2. Unboxing and Device Layout erickhill rt-100 user manual

Understanding the control interface is essential for accurate data collection. The device features three primary buttons located below the screen. 1. Power / V/m / μT Button

Disclaimer: This guide is a simplified interpretation of typical outlet tester manuals. Always prioritize safety, and if you are unsure of electrical wiring, consult a qualified electrician. | Code | Meaning | Solution | |------|---------|----------|

is a professional-grade, hand-held electromagnetic field (EMF) meter designed for the precise detection and measurement of radiation levels. It is widely used for home inspections, identifying radiation sources from household appliances, and even in specialized activities like ghost hunting. Getting Started: Device Setup Before using the Erickhill RT-100

Shows EF (Electric Field) and MF (Magnetic Field) readings, a "Warning" alert, and a battery indicator. The device features three primary buttons located below

The Erickhill RT-100 features an function that turns the device off after 5 minutes of inactivity to conserve battery. 4. Common Applications for the RT-100

: The device typically defaults to Electric Field (EF) mode; use the "MODE" or unit button to toggle between mG and µT for magnetic readings. Technical Specifications Electric Field (EF) Magnetic Field (MF) Range 1 V/m – 1999 V/m 0.01 µT – 99.99 µT Resolution 0.01 µT / 0.1 mG Alarm Threshold > 0.4 µT / 4 mG Safety & Best Practices

About Alex Guymon

Hi, my name is Alex Guymon. I built this site using devlopr-jekyll :D

Star