Id6100 Danieli Manual !full! -

High-speed channels for driving variable speed drives (VFDs) or hydraulic servo valves. 3. Installation and Environmental Requirements

Modern metallurgy relies on interconnected systems. The ID6100 manual details a wide array of communication modules designed to pass data seamlessly to Danieli Automation systems or third-party architectures (such as Siemens TIA Portal or Rockwell Automation Studio 5000).

: Ensure the diagnostic "Healthy" LED is active on the rear of the device.

| Category | Specification | Details | | :--- | :--- | :--- | | | Infrared Loop Scanner (Optical Detector) | Designed for hot rolling mill applications | | Danieli Code | D.A. 5122000021 | Official part number | | Operating Principle | Infrared Detection | Detects the position of a loop between mill stands | | Object Temperature | ≥ 700 °C (1,300 °F) | Detects objects above this temperature | | Detectable Spectrum | 830 to 1000 nm (near infrared) | Optical filter for IR emission | | Sensing Angle (Vertical) | 45° / 30° (Selectable) | Two vertical field-of-view options | | Sensing Angle (Horizontal) | 0.5° | Narrow horizontal field for precision | | Position Resolution | 0.1° | High angular resolution | | Response Time | -- (consult manual) | Important for real-time control loops | | Power Supply | 24 Vdc ± 20% | Low-voltage DC powered | | Power Consumption | 300 mA / 7.2 W | -- | | Outputs | Analog (voltage & current), NPN, PNP | Galvanically isolated, overload and overvoltage protected | | Output Current (NPN/PNP) | Max. 200 mA (one output used @50°C) | Important for load calculations | | Housing Material | Aluminium Die-Cast | Robust construction | | Cooling | Integrated fluid-cooling circuit (air, water, or other fluids) | Essential for high-temperature environments | | Mounting | Semi-circular support plate | Allows 30° vertical adjustment for alignment | | Operating Temperature | 0° to +50°C | Ambient operating temperature | | Storage Temperature | -5° to +80°C | -- | | Protection Class | -- (consult manual) | Important for harsh environments | | Weight | -- (consult manual) | -- | id6100 danieli manual

The is a highly specialized optical heat detector designed for hot rolling mills . It measures the exact position and width of incandescent metals by capturing infrared (IR) radiation via a line charge-coupled device (CCD) camera array. Developed by Danieli Automation , this rugged piece of instrumentation functions as an edge detector, presence sensor, and position tracker in harsh industrial environments where temperatures regularly exceed 750 °C.

This is what every technician searches for. The manual typically lists a table like the one below:

The ID6100 often uses a proprietary Danieli bus (e.g., DBus or CANopen). The manual contains the exact termination resistor values (usually 120 Ohms) and the correct dip-switch settings for node addressing. High-speed channels for driving variable speed drives (VFDs)

If you currently operate a Danieli continuous caster and do not have a copy of the ID6100 manual:

The manual provides detailed wiring diagrams for connecting the device. The ID6100 is designed for a 24 Vdc power supply. It features three types of outputs:

The Comprehensive Guide to the Danieli ID6100 Indicator: Operation, Technical Specifications, and Manual Insights The ID6100 manual details a wide array of

Products › Automation › ID6000 Loop detectors ‹ Danieli

Check input power line for 20–30 VDC. Replace unit if power is verified.

The manual provides the voltage threshold for the digital inputs (e.g., 24V DC ±20%). Many technicians assume the input is 110V AC and fry the board. The manual saves the day.