button to select between metric (Km/H) or imperial (Mile/H) units.
Go back into setup mode and double-check that your four-digit wheel circumference code matches your actual tire sidewall dimensions. If youg., 26x1.95, 700x25c) Which specific setting you are stuck on
Proper installation is vital for accurate readings. The J7 system consists of three main components: the computer unit, the handlebar mount, and the sensor/magnet system. Step 1: Installing the Handlebar Mount
Calories burned and heart rate (when paired with compatible ANT+ or Bluetooth sensors). Convenience Tools: echo j7 cycle computer manual
Move the computer away from other wireless devices or bike lights. Incorrect Data:
| Symbol/Abb. | Function | Description | | :--- | :--- | :--- | | | Current Speed | Your real-time speed at any given moment. | | ODO | Odometer | Total accumulated distance (cannot be reset). | | DST | Trip Distance | Distance traveled during the current trip (can be reset). | | RTM | Ride Time | Elapsed time during your ride. | | MAX | Maximum Speed | The highest speed achieved during the ride. | | AVG | Average Speed | Your average speed for the current trip. | | CLK | Clock | 12/24 hour time display. | | SCAN | Data Scroll | Automatically cycles through your ride data. | | °C/°F | Temperature | External temperature (on select models). |
Cycles through different data sets automatically. Go to product viewer dialog for this item. Installation Guide button to select between metric (Km/H) or imperial
Verify that the computer head is clicked all the way forward into its handlebar bracket, ensuring the metal contact points on the back are touching the pins.
Rotate the front wheel to pass the magnet by the sensor. The gap between the magnet and the sensor must be (roughly the thickness of a penny). Once aligned, tighten all zip ties securely and snip off the excess plastic. 3. Programming and Initial Setup
To ensure accurate speed and distance readings, you must calibrate the unit with your specific wheel circumference. The J7 system consists of three main components:
The ECHO J7 uses a two-button interface. To enter setup, press and hold .
Carefully wrap the sensor wire down your front brake cable housing. Wrapping it around the brake line prevents the wire from flapping, getting caught in the spokes, or snapping when the handlebars turn. Leave enough slack at the top for full steering rotation. Step 4: Attach the Fork Sensor