To reset a Canon G2010 printer, you can either perform a manual factory reset through the settings menu or enter to clear specific errors like the 5B00 (waste ink pad full) error . 1. Simple Factory Reset (Printer Settings)
Click on the or "Waste Ink Pad Counter" button to set the counter to 0. Click "EEPROM" to save changes.
Inside your printer are physical waste ink pads that absorb excess ink during head cleaning and printing cycles. Canon programs a digital counter inside the printer's firmware to estimate when these pads are saturated. Common Symptoms 5B00, 5B01, or 1700 appears on your PC.
| Type | Description | Pros | Cons | | :--- | :--- | :--- | :--- | | | Unofficial Windows-based tools. | Free, widely available. | High virus risk, may not work on new firmware, requires manual entry into service mode. | | Paid Software (e.g., WICReset) | Legitimate third-party tool. | Reliable, updates for new firmware, one-click operation. | Costs ~$10-15 USD per reset. | | Hardware Dongle | Physical USB device. | Works offline, no PC needed after setup. | Expensive ($30+), hard to find. |
Remember: If your Canon G2010 shows the ink absorber full error, do not panic. Download a reputable resetter, prepare your printer in service mode, and reset the counter. But always, always give those waste pads the attention they deserve. resetter printer canon g2010
Next, find the section at the top of the window and click EEPROM . This will print a test page showing a counter value of D=000.0 , confirming the waste ink counter is successfully reset to zero. Phase 3: Exiting and Restarting Close the Canon Service Tool software.
Unplug the power cord directly from the back of the machine, wait 1 minute, and attempt the button sequence again. Ensure no other printing devices are connected to the PC during this process. Important Hardware Maintenance Warning
The Canon G2010 printer uses a Continuous Ink Supply System (CISS), which allows users to refill the ink tanks instead of replacing them. However, the printer's internal counters still track the number of pages printed and estimate the ink levels. When the counters reach a certain threshold, the printer may:
In such cases, a resetter is needed to reset the counters and restore the printer's functionality. To reset a Canon G2010 printer, you can
Your G2010 will show one of these error messages:
While holding the Stop button, press and hold the button.
If your Canon G2010 has a functional control panel screen, you can perform a standard . This is less common on basic G2010 models (which lack an LCD screen), but for those with a digital panel, it restores all network and system settings to default.
If successful, the software will pop up a small dialogue box saying "A function was finished" or "Operation completed successfully." The printer may also feed a single sheet of paper and print a line of text (usually D=000.0 , indicating the counter is now at 0%). Click "EEPROM" to save changes
Press the Stop/Reset button in succession while continuing to hold the Power button. Release both buttons simultaneously.
Once the counter estimates that the pad is full, it triggers a safety lock. You will experience the following symptoms:
Connect the printer directly to your computer using a (do not use a USB hub).
You cannot copy content of this page