Wake On Lan Anydesk Hot Jun 2026

Windows needs permission to keep the network card active while the PC sleeps or shuts down. Right-click the Start button and select .

Right-click the Windows Start button and select . Expand the Network adapters section.

This elegant two-step process makes remote waking seamless and integrated directly into the AnyDesk interface.

What (Windows, macOS, Linux) is running on the target computer?

Open AnyDesk on the target computer and go to > Wake-on-LAN (found under the Application or Security category depending on the version). Select Enabled . wake on lan anydesk hot

Wake-on-LAN (WoL) , you must configure the hardware, operating system, and the AnyDesk application itself. This feature allows you to remotely power on a computer from a sleep or low-power state. 1. Enable Hardware Support (BIOS/UEFI)

Check Allow this device to wake the computer and Only allow a magic packet to wake the computer .

Wake-on-LAN (WoL) in AnyDesk allows you to remotely power on a computer that is in a low-power state, such as sleep, hibernation, or even a full shutdown. For this to work, a "Magic Packet" containing the target machine's unique MAC address is sent through the network to trigger the motherboard to start the system. Core Requirements

Navigate to the Power , Advanced , or ACPI menu. Windows needs permission to keep the network card

For some motherboards, you may also need to disable ErP (Energy-related Products) mode, as this cuts power to the network card during shutdown.

:

Ensure your PC is not set to turn off the network card to save power. 3. Setting Up AnyDesk

Once configured, follow these steps to turn on your PC remotely: Open AnyDesk on your local device. Expand the Network adapters section

Right-click your Ethernet adapter (e.g., Realtek PCIe GBE Family Controller) and select .

(Right-click on Start > Device Manager).

Ensure your Network Interface Card (NIC) drivers are up to date.