Install: Firstchip Fc1178 Fc1179 Mptools V1052

Run vendor utility to enumerate ports and attached drives; note link speed and mode (AHCI/IDE/RAID as applicable).

if you're unsure of your chipset.

Set to Auto so the software maps only the completely healthy sectors. Step 4: Execute the Mass Production Process

Preparatory steps

Choose this mode if you are dealing with a counterfeit drive that exhibits unstable capacity readings. It wipes bad blocks entirely to find the true storage size. firstchip fc1178 fc1179 mptools v1052 install

MpTools is a "portable" application, meaning it does have a traditional installer.

Reproducible change log and recommended safety practices

: Use a tool like ChipGenius to confirm your drive actually uses a FirstChip controller before running this software.

C. Build and install vendor module (if provided) Run vendor utility to enumerate ports and attached

Look for the status indicator to turn solid green with a or OK notice.

The FirstChip FC1178 and FC1179 are highly sought-after chipsets used in a variety of applications, including digital video recorders (DVRs), network video recorders (NVRs), and other surveillance systems. These chipsets are renowned for their exceptional performance, reliability, and flexibility. However, to fully harness their capabilities, users need to install the right software tools. This is where MPTools v10.52 comes into play.

If that fails, try "Factory Scan" to perform a deeper reset of the NAND memory.

FirstChip MPTools is a specialized utility used for repairing, formatting, and managing USB flash drives that utilize FirstChip controllers. Version V1.0.5.2 is particularly essential for modern drives using the FC1178 and FC1179 chipsets. This guide will walk you through the installation and configuration process to recover "dead" or write-protected drives. Understanding the FirstChip FC1178 and FC1179 Controllers Step 4: Execute the Mass Production Process Preparatory

Symptom: Windows blocks driver install with signature error.

FC1178 (including variants like FC1178BC) or FC1179 (e.g., FC1179 AA3)

The tool automatically scans your USB buses upon launch. Your drive should appear in one of the numbered slots showing information like the flash memory type, current capacity, and ID code. If it does not appear, press the (or F5 ) button. 2. Configure Production Settings

: When clicking the "Settings" button, the tool may ask for a password. Leave the field empty and click OK to proceed.