For a safer and more permanent resolution, it is highly recommended to have your printer professionally serviced if it displays "Waste Ink Tank Full" errors. If you choose to use the v3600 tool, proceed with extreme caution, ensure you are using a clean version of the software, and carefully follow the instructions. You assume all risks and responsibilities for any damage or issues that may arise.
Click the button to the right of it. The printer will process the command and may print a single page containing counter data. 2. Reset Ink Operations Move down to the Ink Absorber Counter section. Ensure the Counter Value is set to 0% . Click Set . 3. Finalize and Exit
To clear the waste ink error, locate the "Clear Waste Ink Counter" section. Ensure the "Main" absorber is selected in the dropdown menu and click "Set." The printer should perform a brief internal movement and print a confirmation page. After this, turn the printer off and back on to return to normal operation. Safety Precautions and Best Practices
The is an official executable program used by technicians to perform maintenance on Canon Pixma printers. It is primarily utilized to clear the 5B00 "Ink Absorber Full" error by resetting the internal waste ink counter back to zero. Canon service tool v3600
Once the software interface is active, follow these exact steps to clear the error:
Print EEPROM Data: View the technical history of the printer, including page counts and error logs.
While holding Resume, press and hold the Power button. Do not release either button. For a safer and more permanent resolution, it
Turn off the printer using its physical Power button (you may need to press it twice).
Version v3600 is compatible with many older and mid-range PIXMA models, including: : iP2700, iP3600, iP4800, iP4900
Print diagnostic pages to check printer functionality. Supported Canon Printer Models (v3600) Click the button to the right of it
: Triggers specialized patterns (Service Test Print, EEPROM Information) to check nozzle health and alignment .
Do not repeatedly click buttons if you see this error. Doing so can lock up the printer's main IC chip permanently, rendering the device completely unusable ("bricked"). Physical Pad Maintenance
This indicates that the printer was not properly put into Service Mode before opening the software.
: Turn the printer off but keep it connected to the computer via USB .
The software reset only clears the digital counter; The waste ink pads are dense felt blocks located at the bottom of the printer that catch excess ink from cleaning cycles. If you reset the counter multiple times without physically replacing or washing the felt pads, ink will eventually overflow, potentially ruining your desk, carpet, or the printer’s internal electrical components. 3. Malware and Safety