The DVB01 module is known for its stability and high-quality components. Accuracy: ±0.1Vplus or minus 0.1 cap V
): Relay activates when voltage drops below the set limit, often used for battery protection. In-Range Suction (
To turn the display back on, press and hold the button for 2 seconds again. Troubleshooting & Tips dvb01 user manual
| Button | Label | Function | |--------|-------|-----------| | POWER | Red | Standby (not full power-off) | | MENU | Menu | Main settings / installation | | EPG | Guide | Electronic Program Guide | | INFO | i | Channel & signal info | | SUB | Subtitle | Toggle subtitles | | AUDIO | Audio | Switch audio tracks | | FAV | Fav | Favorites list | | TTX | Text | Teletext | | PVR | (Red dot) | Record (if USB storage attached) |
Power input for the DVB01 board itself (match voltage variant). V+ / V- (or IN+ / IN-): Measured voltage input (0-99.9V). The DVB01 module is known for its stability
is a multifunctional voltage monitoring controller used to trigger an onboard relay based on specific DC voltage thresholds. It supports a measurement range of 0V to 100V DC with an accuracy of approximately Amazon.com 1. Interface & Connections
: Inside the P-1 sub-menu, use [+] and [-] to set your first voltage (V1, e.g., 120 for 12.0V). Press [SET] to save and move to P-2, then set your second voltage (V2, e.g., 144 for 14.4V). The module will automatically assign which is the upper and lower limit. Troubleshooting & Tips | Button | Label |
The manual fails to mention that after moving channels, the numeric buttons still reference original positions unless you save the new “channel list mapping” to a USB stick—a feature only in later firmware.
All settings are automatically saved and retained during power loss.