5 x SATA II 3.0 Gb/s connectors (Some board revisions feature 1x SATA III) Realtek High Definition Audio Network Interface Intel Gigabit Ethernet (10/100/1000 Mbps) Form Factor Micro-ATX (244mm x 244mm) Processor and Memory Installation
The front panel header is typically color-coded or outlined at the bottom right corner of the motherboard. It utilizes a standard 14-pin grid (with one missing pin acting as a key orientation guide): acer q65h2-am v1.1 manual
The LGA 1155 socket requires care. Align the triangle on the processor with the triangle on the socket. The board supports Intel Core i7, i5, and i3 processors, typically maxing out at 95W TDP. 2. Memory Setup 5 x SATA II 3
Connects the case's master physical power button. Bridge these two pins to toggle system startup. Orientation does not matter. The board supports Intel Core i7, i5, and
| Jumper | Function | |---------|------------------------------------------------| | (CLR_CMOS) | Near the coin cell battery – short pins 2-3 to clear, then back to 1-2. | | ME_UPDATE | Rarely touched – used for Intel Management Engine recovery. | | PSWD | Two-pin jumper – remove to clear BIOS password. |
The front panel header handles your case's power button, reset button, and status LEDs. It follows standard 9-pin block configurations, typically arranged as follows: