Gently pop the clips by twisting the pry tool, moving slowly along the bottom edge, up the sides, and across the top.
If you are performing a disassembly just to clean dust, you do not need to remove the motherboard or LCD. Removing only the back cover and fan is sufficient for cleaning the heatsink.
Use a plastic pry tool to gently unclip this plastic vanity cover. acer aspire zc610 disassembly full
A #1 and #2 Phillips screwdriver will handle all internal and external screws.
Gather the following before you begin:
Caution: Do not pull too hard or use a metal screwdriver, as you can easily crack the plastic housing.
Pull the stick out gently from the slot. Insert the new module at the same angle and push down until the clips snap back into place. Cleaning the Cooling Fan and Heatsink Gently pop the clips by twisting the pry
With the back cover removed, the internal components of the Acer Aspire ZC610 become fully visible. Acer’s official documentation labels these key components as: