Invt Che100-0r7g-s2 Manual

Equipped with 4 digital inputs, 2 analog inputs, 1 relay output, 1 analog output, and 1 open-collector output. Common Uses:

: Sensorless Vector Control (SVC) and V/F Control

: Main power grid voltage dropped below acceptable thresholds, or a loose input wire power connection.

The inverter features a comprehensive fault protection system. If you see an error code on the LED display, here is what they generally mean: invt che100-0r7g-s2 manual

| Parameter | Name | Recommended Value for 0.75kW Motor | | :--- | :--- | :--- | | P0-01 | Motor control mode | 0 (V/F control) or 1 (Sensorless vector) | | P0-03 | Max output frequency | 50.00 Hz (or 60.00 Hz for North America) | | P0-04 | Upper limit frequency | 50.00 Hz | | P1-00 | Motor rated power | 0.7 kW (or 0.75 kW depending on motor plate) | | P1-01 | Motor rated voltage | 220 V | | P1-02 | Motor rated current | Find value from motor nameplate (typical: 3.5–4.2A) | | P1-03 | Motor rated frequency | 50 Hz or 60 Hz | | P1-04 | Motor rated speed | e.g., 1420 RPM (for 4-pole 50 Hz) |

Move the cursor across display digits during parameter editing.

: Time required to go from Max Frequency to 0Hz. Equipped with 4 digital inputs, 2 analog inputs,

: Check all terminal screws quarterly. Thermal cycles can loosen terminal connections.

The control terminal logic (PNP vs NPN) is explained in the manual. Connecting a PLC output incorrectly can damage the drive’s 24V internal supply.

: 150% of rated current for 60 seconds; 180% for 10 seconds 2. Hardware Installation and Dimensions If you see an error code on the

The INVT Che100-0R7G-S2 manual also covers additional features and functions, including:

The details the terminal layout for input, output, and control wiring. Power Wiring

Importance of Accurate Documentation Accurate and clear manuals reduce installation errors, downtime, and safety incidents. For integrators, well-structured parameter descriptions and wiring diagrams speed commissioning. For maintenance teams, comprehensive fault descriptions and troubleshooting steps shorten mean time to repair. Manuals also provide compliance evidence for regulatory inspections and support lifecycle activities such as firmware updates and part replacements.