Ixr X1 Installation Guide | Nokia 7250

The 7250 IXR X1 runs (Nokia’s native OS).

set / interface ethernet-1/1 admin-state enable set / interface ethernet-1/1 subinterface 0 ipv4 address 192.168.1.2/24

The Nokia 7250 IXR X1 can run , a modern, model‑driven network operating system. This guide assumes installation of SR Linux, but the platform also supports other NOS options. nokia 7250 ixr x1 installation guide

system hostname RTR1-DC-Spine dns server 8.8.8.8

Choose a site that meets the following environmental requirements: The 7250 IXR X1 runs (Nokia’s native OS)

This guide focuses on the manual recovery method, as it provides the most control over the installation process.

This guide will walk you through the entire installation process, from unpacking the device to bringing the network online. system hostname RTR1-DC-Spine dns server 8

The IXR-X1 is typically installed in standard 19-inch equipment racks. Physical Dimensions : 1RU, 4.5 cm (1.75 in). : 44.45 cm (17.5 in). : 54.6 cm (21.5 in). Environmental Requirements

The Nokia 7250 IXR X1 is a high-performance, fixed-configuration router designed for IP aggregation, data center interconnect (DCI), and 5G transport networks. This guide covers the physical installation, initial power-on, and basic configuration to get the chassis up and running.