a web browser and type http://192.168.0.1 or http://dlinkrouter.local into the address bar. Log in by supplying your administrative credentials.
This was a serious risk for anyone using this firmware version, as it exposed the router's management interface to potential compromise from within the local network.
The DWR-M960-V1.1.49 firmware version provides several benefits to users, including:
: Simultaneous bands handle heavy data traffic like streaming and online gaming.
Skipping updates or running outdated configurations on edge-routing devices like the DWR-M960 poses significant risks:
Download the correct firmware for your from the official D-Link support site . Connect to your router via Ethernet at 192.168.0.1 .
D-Link later released v1.2.0 and v1.2.2 for newer hardware revisions (DWR-M960 rev B). However, not all rev A devices support v1.2.x due to a different NAND flash layout. If your device is a rev A (check the sticker on the bottom), .
If your wireless devices are dropping connections after the update, a factory reset is highly recommended. Major firmware updates often leave behind conflicting configuration remnants from old software versions.
Access the router management page ( 192.168.0.1 ) through your browser.
If your DWR-M960 is already running 1.1.46 or newer, you can skip this update unless you need the minor LTE reconnection fix. For users on older firmware, this version delivers noticeable improvements in reliability without introducing regressions. Power users dependent on band locking or VPN performance should consider third-party firmware instead.
