Tgc Bc-90-1h Manual

– Every few months, verify that the remote still controls the water heater correctly and that the temperature display is working.

This section details how an engineer integrates the BC-90-1H into a full machine assembly.

Press the "On/Off" button; the digital display will light up.

While the water is actively running, you can decrease the temperature at any time. However, if the water heater is operating and the temperature is already at or above , the system blocks any further temperature increases to prevent accidental burns. Turn off the water tap to safely adjust temperatures above this threshold. Seasonal Volume Adjustments tgc bc-90-1h manual

Since manufacturers often change websites or rebrand, here are the three most effective ways to find this specific manual:

: Used to precisely increase or decrease the water temperature.

(down) button to adjust the water temperature to your desired level. – Every few months, verify that the remote

If another controller was in use, its priority indicator will blink or turn off, signaling that the is now in control. 4. Safety Precautions

Press the button again to turn off the water heater entirely. 2. Setting the Temperature

Measure and mark the 860mm x 480mm dimensions on your countertop. While the water is actively running, you can

Test all joints for leaks using a soap and water solution (never use a naked flame). 4. Operating Instructions Lighting the Burners Push down the control knob fully. Turn the knob counterclockwise to the "Max" position.

– The Hong Kong Towngas appliance download page contains product manuals for RBOX series water heaters, which reference the BC-90-1H remote controller.