Mxq Amlogic S805 Android 511 Lollipop Download Install New! Jun 2026

| Problem | Likely cause | Solution | |---------|--------------|----------| | USB tool sees [0x10105002] | Wrong USB port | Use port nearest AV | | Box stuck at boot logo | Wrong DDR/NAND config | Find exact PCB version firmware | | No WiFi | Wrong WiFi driver | Open box → check chip → reflash correct firmware | | USB tool [0x32030201] | USB cable or driver issue | Use short A-A cable, reinstall driver, disable driver signature enforcement | | SD card method not booting | bootloader mismatch | Try USB method instead |

After successful flash:

Open the tool, click on in the top-left corner, and select Import Image .

: Flashing firmware carries a risk of "bricking" the device. Ensure you have a backup of your original firmware or know how to use the Amlogic USB Burning Tool for a hard recovery if needed. as a safer alternative? mxq amlogic s805 android 511 lollipop download install

Report compiled for informational purposes. The author is not responsible for device damage. Always back up original firmware before flashing.

Do not disconnect the cable, power down your PC, or disturb the TV box during this time.

Do not turn off the box during installation. Step 1: Download Android 5.1.1 Lollipop Firmware | Problem | Likely cause | Solution |

What is the USB Burning Tool showing?

Often titled "MXQ S85 Android 5.1.1 Firmware."

Never skip this step. Firmware variations mean this port could fail on your specific motherboard. Having a local backup allows you to revert instantly if your screen gets stuck during boot. as a safer alternative

Copy the extracted update files directly to the root directory of your SD card. Step 3: Installing the Firmware (The "Toothpick" Method) Power off your box and unplug the power cable. Insert the Micro SD card into the slot.

by inserting it into your PC, right-clicking the drive, and selecting FAT32 as the file system.

However, time has not been kind to the software. Many units suffer from sluggish performance, outdated Kodi versions, or boot loops. If you are holding one of these devices, you might think it’s time for the trash. But with a bit of effort, you can breathe new life into it by flashing a fresh stock firmware.

: Flashing custom firmware can potentially break (brick) your hardware. Ensure you have a recovery plan before proceeding. Required Tools and Files