A "Site" in ION Setup logically represents a physical location.
: Easily import device configurations directly from Power Monitoring Expert (PME) to maintain network consistency. Schneider Electric FAQ
Set up setpoints that trigger digital outputs when voltage drops or current spikes exceed predefined tolerances.
Run the .exe file as an administrator. Follow the installation wizard. Launch: Once installed, launch the application. Getting Started: Navigating the Interface ion setup 3.2
If a framework change fails, always check the TEMPLATE.LOG file, which is created by ION Setup. It provides specific error codes. 3. Communication Issues
Once ION Setup 3.2 is installed, your goal is to connect to your power meter. Here is how you do it.
Using Advanced Mode, you can link the output of one module to the input of another. For example, you can wire a (triggered by a breaker trip) directly to an Onboard Logging Module to log the millisecond-accurate timestamp of an electrical fault. A "Site" in ION Setup logically represents a
Version 3.2 was a significant release that introduced support for newer metering hardware and improved the graphical user interface (GUI) before the software transitioned to the "EcoStruxure" branding.
Connect to the meter via Modbus TCP (Port 502) or Modbus RTU. Input the correct CT and VT scaling ratios. Select the matching Power System Type (Wye vs. Delta).
Meters do not read high transmission voltages or industrial currents directly; they rely on Transformers. You must scale the meter to read these inputs correctly. Navigate to the > Basic Setup > Volts/Amps . Run the
Choose the standard installation components. Ensure the "Device Drivers" option is checked to support direct USB connections to specific meters.
Think of it as the software dashboard for your advanced power meters. Instead of manually configuring each device through a tiny, cryptic front-panel screen, ION Setup allows you to do everything remotely from a Windows computer. You can connect to meters over Ethernet or serial communications, making large-scale setup, troubleshooting, and firmware updates not just easier, but possible .
Given the ambiguity, here is a quick guide to help you identify the correct tool:
| Component | Minimum Requirement | |-----------|---------------------| | OS | Windows 10 (21H2+) or Windows 11, Windows Server 2019+ | | RAM | 4 GB (8 GB recommended for large sites) | | Disk Space | 500 MB | | .NET Framework | 4.8 or later | | Display | 1280 x 768 (1366 x 768 recommended) | | Communication Ports | RS-232, RS-485 (USB adapter), Ethernet (10/100) |