Alpha V1 Jet-em Manual

Navigate to MENU > SIGNAL > DAMP . The default is 5 seconds. For pulsating flow (e.g., piston pumps), increase to 10-15 seconds. For custody transfer, reduce to 1 second. Formula in manual: Damping time = 63% of step change.

Connect the 3-phase power cable to an appropriately fused electrical outlet matching the device rating plate. alpha v1 jet-em manual

Ensure the main power switch on the Alpha V1 Jet-Em is turned . Navigate to MENU > SIGNAL > DAMP

Ensure the electrical mains are off before commencing work. Wiring: Use appropriate cables. Connect according to: Live (L): Red or Brown Neutral (N): Black or Blue Earth ( ): Yellow/Green or Green/Yellow For custody transfer, reduce to 1 second

Clean the printhead with the recommended solvent before every shift.

1. Run an intense solvent purge.2. Replace nozzle and needle cartridge.3. Increase syringe backpressure incrementally.