: If your computer lacks an ethernet port, you can connect via Wi-Fi. Look for an open wireless network named something like MikroTik-XXXXXX . No password is required for this initial connection. Step 2: Accessing the MikroTik Router Quick Setup Link
Plug in the power adapter and wait about one minute for the router to boot fully. Step 2: Accessing the Quick Setup Link
Click the button (usually located in the top-right or bottom-right corner). mikrotik router quick setup link
A quick distinction is helpful here. Router mode forwards traffic between networks (like between your home devices and the internet) using IP addresses. Bridge mode connects multiple network interfaces to act as a single network segment, effectively turning the router into a switch or hub.
Before attempting to access the MikroTik configuration page, ensure your hardware is wired correctly. Incorrect cabling is the most common reason users cannot reach the setup link. : If your computer lacks an ethernet port,
: Plug a separate ethernet cable into any of the remaining ports (e.g., Ether2 , Ether3 , or Ether4 ) and connect the other end to your computer.
In the top-left corner of the Quick Set screen, you will find a drop-down menu with several modes. Choosing the correct mode changes the layout to match your specific deployment scenario: Step 2: Accessing the MikroTik Router Quick Setup
Connect your computer to any Ethernet port on the MikroTik router. Avoid using ether1 (port 1) if possible , as on many routers, this is designated as the "Internet" (WAN) port. Use ports 2, 3, or 4 to establish a Local Area Network (LAN) connection.
Type 192.168.88.1 into the address bar of your browser (Chrome, Firefox, Edge, etc.).