Qidi Xplus Firmware Install Info

Run the full automatic bed leveling (ABL) sequence.

Unzip the downloaded file directly to the root directory of your USB drive. You should see files with extensions like .bin , .gcode , and .ui .

Rename the file to exactly what your motherboard requires (usually update.bin or left as factory default, depending on release notes). Copy it to your FAT32 USB drive.

Access to new, advanced Klipper functionality. qidi xplus firmware install

Copy all your current files, specifically your printer.cfg if you have one.

Ensure the file names were not altered during download.

Confirm if you have the original X-Plus (Chitu-based framework) or the X-Plus 3 (Klipper-based framework). Firmware files are not interchangeable. Run the full automatic bed leveling (ABL) sequence

Before downloading files, check your current system version to see if an update is necessary. Turn on your QIDI X-Plus. Tap the or Setting icon on the touchscreen. Select About or System Info . Note down the current firmware version number. Step 2: Download the Official Firmware

Turn off the QIDI X-Plus using the physical rock switch on the back.

If your screen stays black after an update, remove the USB drive, delete the files, re-download the firmware, and try a different USB drive. Rename the file to exactly what your motherboard

The QIDI X-Plus has multiple hardware versions. Installing the wrong firmware can brick your printer.

To install firmware on a QIDI X-Plus series printer, you can generally choose between an via the printer's touchscreen or an offline update using a USB drive . Option 1: Online Update

Before starting any firmware update, complete these preparation steps:

Improved translation support for global users. Pre-Installation Requirements Before beginning the update process, gather the following: