Fnirsi 1014d Firmware Link

To ensure your update went through successfully, press the button on your oscilloscope, navigate to "System Setting" , and verify that the version string matches the version number listed in the download folder.

If you prefer a visual walkthrough, here are some dedicated video tutorials that show the entire firmware update process in real-time.

| Problem | Likely Cause | Solution | |---------|--------------|----------| | | Corrupted file or power loss | Reboot by holding power for 15 seconds. Use a different SD card. | | White screen / No boot | FPGA mismatch | You need to also update the FPGA bitstream (included in official ZIP as a .rbf file). Repeat update with both files. | | “Update file not found” | Wrong file name or path | Rename the file to FW1014D.bin (case sensitive). Ensure it’s not in a folder. | | Touchscreen works but buttons don’t | Bootloader mismatch | Roll back to previous stable version (e.g., v1.2.0) then update again. | fnirsi 1014d firmware link

the new FSI-1014.bin file directly onto the root directory of the 1014D drive.

On the oscilloscope, navigate to the menu and select . To ensure your update went through successfully, press

To help you get the most out of your updated oscilloscope, let me know if you would like me to provide , explain how to use the built-in signal generator , or provide links to the PC analysis software . Share public link

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Use a different SD card

firmware link , how to update the device safely, and how to troubleshoot common issues. 1. Where to Find the Official FNIRSI 1014D Firmware Link

Fixes baseline noise rendering issues at high time-base settings.

Before flashing, open your 1014D and check the PCB version (e.g., V1.3, V2.1, V3.0). Loading firmware for the wrong revision will brick the device (black screen, unresponsive buttons). Recovery requires disassembly and flashing via an ST-Link programmer.

Ensure the file is named exactly FSI-1014.bin and is located in the root directory, not within a folder.