Orbitor Prospector 100 Metal Detector Manual !free!
Lower the discrimination knob to the mid-way point to avoid masking targets.
Most models require two 9V batteries or a rechargeable unit, offering approximately 8 hours of use. Quick Start Guide: Setup and Calibration Orbitor Prospector 100 Metal Detector Manual
The Orbitor Prospector 100 is a versatile, user-friendly metal detector designed for hobbyists, treasure hunters, and backyard explorers. Whether you are searching for lost jewelry, old coins, or hidden relics, understanding your device's controls and mechanics is key to a successful hunt. Lower the discrimination knob to the mid-way point
Lower the volume; increase discrimination; hunt away from power grids. Low battery voltage Check battery levels or replace the battery immediately. Intermittent signals Loose cable connection Whether you are searching for lost jewelry, old
Tighten the cable collar connector on the control box. Check battery voltage. Discrimination dial is set too high.
Contact your authorized Orbitor dealer or: Orbitor Support Email: support@orbitor-metaldetectors.com Web: www.orbitor-metaldetectors.com/support
Connect the cable plug into the control housing, ensuring you don't cross-thread the connector. These units typically require one or two 9-volt alkaline batteries