Verify your home outlet matches the voltage listed on the fan rating label (typically 120V AC, 60Hz).
These units are typically designed for indoor use as freestanding appliances. Assembly Check
Toggle between Normal mode (constant stream), Natural mode (simulated random wind breezes), and Sleep mode (gradually decreasing fan speeds). Using the Remote Control sunrise fan manual
Unplug the fan from the electrical outlet when moving it, cleaning it, or when it is not in use. Electrical Safety
Loosen the height adjustment collar on the pole, extend the inner chrome shaft to your desired height, and tighten the collar. Step 2: Rear Guard and Blade Installation Verify your home outlet matches the voltage listed
Turn off the unit, unplug it, and tighten all assembly nuts. Uneven flooring surface. Move the fan base onto a perfectly level, flat floor. Depleted batteries.
Apply sealant under the flashing and secure with exterior-grade screws. Using the Remote Control Unplug the fan from
Do not insert fingers, pencils, or other objects through the guard grills while the fan is running.
Pass the 120-volt supply wires through the center hole of the ceiling mounting bracket.
Align the holes, insert the hitch pin, and secure it with the cotter pin. Tighten the set screws on the motor yoke firmly. 3. Hanging the Fan Lift the fan assembly into the mounting bracket.