The is a critical aspect of repairing and designing modern LED/LCD display boards, as it controls the integrated circuit's (IC) response to system faults. Manufactured by Monolithic Power Systems (MPS) , the MP3378E is a highly efficient, single-chip combination IC that features a 4-channel WLED backlight controller alongside a high-efficiency synchronous buck converter. In commercial repair environments, technicians frequently look up ways to alter or stabilize the protection network to diagnose "one-time blink" errors or bypass faulty LED strip sensors during troubleshooting.
), the device enters thermal shutdown. Critically, it is designed to once the temperature drops, preventing permanent "lock-out" in consumer electronics.
The source current of the external boost power MOSFET flows through a current-sense resistor hooked up to the . MP3378E - Monolithic Power Systems mp3378e protection pin upd
Placing a bleeds off fault charges, preventing the internal timer from reaching the latch voltage. Method C: Bypassing Unused LED Channels
, up to 24V) into the higher forward voltage needed to power the display backlight. The Buck Converter The is a critical aspect of repairing and
Following this testing protocol ensures you fix the root cause of the power management loop without compromising device safety.
Check if the PROT pin trace runs parallel to the SW (switching) node for more than 5mm. Switching spikes (up to 50V/ns) can couple into the PROT pin, causing false UPD. A 100pF capacitor from PROT to GND near the IC often resolves this. ), the device enters thermal shutdown
The is a 4-channel WLED controller and high-efficiency buck converter primarily used for LCD backlight applications. While it does not feature a single pin explicitly labeled "Protection," its safety functions are distributed across several dedicated pins: Key Protection Pins and Functions
I can provide the exact resistor values and schematic adjustments needed for your update. AI responses may include mistakes. Learn more Share public link